This National Instruments BNC-2140 DSA Signal Conditioning Accessory Replacement Card is new from surplus stock.

Part Number: 184777B-01

National Instruments BNC-2140 Manual (pdf)

This National Instruments GPIB-ENET Power Supply Board is new from surplus stock. It is a replacement board for the GPIB-ENET power supply(not the GPIB-ENET/100). NI Assy # 181880H-31.

This National Instruments BNC-2081 Analog BNC Breakout Board is new from surplus stock. It ships in the NI static bag.

National Instruments BNC-208x Series Manual (pdf)

This National Instruments SCXI-1500 printed circuit board assembly is new from surplus stock. It is a replacement board for NI SCXI Strain Gage Input modules. NI Assy # 185540C-01.

This National Instruments PXI-6810 Floppy Disk Controller Board is used and in excellent condition. NI Assy# 186160E-01.

This National Instruments 184339C-01 PCB Assembly is used, and in excellent condition. It is a PCB with a 68-pin connector that is used in PXI-8170 series boards (PXI-8170, PXI-8176, PXI-8175, PXI-8174).

This National Instruments VXIpc-700 Series Mainboard is new from surplus stock. It is the main CPU board with an AMD Am486DX5-133W16BGC processor (133MHz 486). A great replacement board for a broken unit.

Part Number: 183714C-01.

This National Instruments VXIpc-700 Series Mainboard is new from surplus stock. It is the main CPU board with an AMD Am486DX5-133W16BGC processor (133MHz 486). A great replacement board for a broken unit.

Part Number: 183469C-01.

This National Instruments VXIpc-700 Series Mainboard is new from surplus stock. It is the main CPU board with an AMD Am486DX5-133W16BGC processor (133MHz 486). This unit also has the floppy drive, front panel, and rear metal housing plate. A great replacement board for a broken unit.

Part Number: 183714C-01.

This NI P/N 183155B-02 PCB board is new from surplus stock. It is a part for NI VXIpc series controllers.

This NI P/N 185988B-01 PCB board is new from surplus stock. It has integrated 9-pin and 25-pin D-type connectors and a pushbutton switch on-board and is a VXIpc Controller Series parallel/serial connector block assembly.

This National Instruments VXIpc-800 Series Mainboard is used, and in excellent condition. It is the main CPU/Mother Board Assembly. This unit also has the floppy drive, front panel, and rear metal housing plate, also extra connector on riser card. A great replacement board for a broken unit. National Instruments P/N: 182840K-02.

This National Instruments VMEpc-600 Series Mainboard is new from surplus stock. It is the main CPU board with open connectors. A great replacement board for a broken unit. National Instruments P/N: 183851D-02.

This National Instruments ELVIS (Educational Laboratory Virtual Instrumentation Suite) Prototyping Board is new from surplus stock (in the NI sealed static bag).

National Instruments Part Number: 188429-01.

National Instruments ELVIS Datasheet (pdf)

This National Instruments VXIpc-800 Series Mainboard is used, and in excellent condition. It is the main CPU/Mother Board Assembly. This unit also has the floppy drive, front panel, and rear metal housing plate. A great replacement board for a broken unit. National Instruments P/N: 183466J-01.

This National Instruments VXIpc-600 Series Mainboard is new from surplus stock. It is the main CPU board with 3 cable connectors on board. A great replacement board for a broken unit. National Instruments P/N: 183851D-01.

This National Instruments PXI-PCIO Embedded Controller Board is new from surplus stock. It is a Controller Board with Floppy Disk &Duel I/O Controller and Yellow/Green LEDs. A great replacement board for a broken unit. National Instruments P/N: 184414D-01.

This National Instruments Firewire 1394 Motherboard is new from surplus stock. This unit ships in manufacturer's bag.

Part Number(s): 184946C-02, 184946E-02

This National Instruments Motherboard is new from surplus stock. It is a Generic Motherboard Memory Slots and Bottom connectors to attach to another board. A great replacement board for a broken unit. National Instruments P/N: 184466C-01.

This National Instruments VXIpc-800 Series Mainboard is used, and in excellent condition. It is the main CPU/Mother Board Assembly. This unit also has the floppy drive, front panel, and rear metal housing plate. A great replacement board for a broken unit. National Instruments P/N: 182840K-01.

This National Instruments PXI-5610 2.7 GHz Upconverter Internal Circuit Board is new from surplus stock. It ships in NI Static bag. National Instruments P/N: 188561C-01

The National Instruments VXIcpu-030 Main PCB Assembly is used an in excellent condition.

VXIcpu-030 Getting Started (pdf)

This National Instruments xx93 Daughterboard is new from surplus stock. It comes in the original static bag.

This unit is used in the NI PXI-2593 and NI SCXI-1193.

Click here to see a picture of the xx93 Card

This National Instruments 185856D-02 Daughterboard is new from surplus stock. It comes in the original static bag.

Relay Replacement Kit for NI 2590 for PXI (1.3 GHz Switch) 1x4, 1.3 GHz Multiplexer, 50 Ohm.

Click here to see a picture of the 185856D-02 Card

This National Instruments CB-50LP Input / Output Connector Block is used and in excellent condition. The CB-50LP is a termination board with 50 screw terminals for easy connection of field I/O signals to NI 650x and NI 6527 devices. Includes one 50-Pin header for direct connection to 50-Pin cables. The CB-50LP includes metal standoffs for use on a desktop or for mounting on a custom panel.

Dimensions: 5.22" X 2.83" (13.26 cm X 7.19 cm)

Part Number: 182943B-01

National Instruments CB-50LP Input / Output Connector Block Datasheet (pdf)

Product Family: CB-50LP, CB50LP, CB 50LP, CB-50-LP, CB-50LP, CB-50 LP, CB 50 LP, CB50-LP, CB50 LP

This National Instruments CB-50LP Input / Output Connector Block is new from surplus stock. The unit ships in the original manufacturer's box. The CB-50LP is a termination board with 50 screw terminals for easy connection of field I/O signals to NI 650x and NI 6527 devices. Includes one 50-Pin header for direct connection to 50-Pin cables. The CB-50LP includes metal standoffs for use on a desktop or for mounting on a custom panel.

Dimensions: 5.22" X 2.83" (13.26 cm X 7.19 cm)

Part Number: 182943B-01

National Instruments CB-50LP Input / Output Connector Block Datasheet (pdf)

This National Instruments Fieldbus Round Card is new from surplus stock. The Fieldbus Round Card is a stand-alone card that allows you to interface to a network that complies with the Fieldbus Foundation H1 Specification.

Product Family: 183327-01, 183327B-01

National Instruments Fieldbus Round Card Datasheet (pdf)

This National Instruments Serial Programming Daughter Card for Fieldbus Round Card is new from surplus stock. It ships in the opened NI static bag.

P/N: 184942A-01

National Instruments MC68331 Fieldbus Round Card Manual (pdf)

This National Instruments OEM Fieldbus Round Card is new from surplus stock. The Fieldbus Round Card is a stand-alone card that allows you to interface to a network that complies with the Fieldbus Foundation H1 Specification.

Product Family: 184497D-02

National Instruments Fieldbus Round Card Datasheet (pdf)
National Instruments MC68331 Fieldbus Round Card Manual (pdf)

This National Instruments VXIpc-850 Series CPU Card is new from surplus stock. It is the PCB board with Intel MMX 200MHz CPU. It is a great replacement board for a unit that has gone bad. National Instruments P/N: 183631C-03.

This National Instruments VXIpc-850 Series CPU Card is new from surplus stock. It is the PCB board with Intel Pentium 133MHz CPU. It is a great replacement board for a unit that has gone bad. National Instruments P/N: 183631C-02.

This National Instruments VXIpc-850 Series CPU Card is new from surplus stock. It is the PCB board with Intel MMX 200MHz CPU. It is a great replacement board for a unit that has gone bad. National Instruments P/N: 183631C-04.

This National Instruments VXIpc-850 Series CPU Card is new from surplus stock. It is the PCB board with Intel MMX 200MHz CPU. It is a great replacement board for a unit that has gone bad. National Instruments P/N: 183631C-05.

This National Instruments VXIpc 800 Series Flex Riser Card is new from surplus stock. A great replacement board for a broken unit. National Instruments P/N: 183651B-01.

This National Instruments UMI-4A Interface Card is used and in excellent condition. The UMI-4A is used to interface external devices to NI motion control boards.

National Instruments UMI Manual (pdf)

View Photo of the bottom of this unit

Part Number: 184966C-01

This National Instruments UMI-4A Interface Card is new from surplus stock. The UMI-4A is used to interface external devices to NI motion control boards.

National Instruments UMI Manual (pdf)

This National Instruments UMI-FLEX4 Interface Card is new from surplus stock. The UMI-FLEX4 is used to interface external devices to NI motion control boards.

National Instruments UMI-FLEX4 Manual (pdf)

This National Instruments GPIB-1284CT Parallel-to-GPIB Controller PCB board is new from surplus stock. It is the fully populated and operational printed circuit board of the GPIB-1284CT. It is without the metal enclosure or A/C adapter (item ships as pictured). It is a perfect replacement board for a unit that has gone bad. This unit ships in the original static bag.

Part Number: 182450D-02

National Instruments GPIB-1284CT Datasheet (pdf)
National Instruments GPIB-1284CT Manual (pdf)

This National Instruments Single-Slot SCXI Blank Filler Panel is used, and in excellent condition.

This National Instruments Single-Slot PXI Blank Filler Panel, 13.8mm Wide, is used and in excellent condition.

This National Instruments Single-Slot PXI Blank Filler Panel, 20mm Wide, is used and in excellent condition.

This National Instruments VXI-1501 Chassis Filler Panel Kit is new from surplus stock. The kit is also known as the Agilent E8750A C-Size Mainframe 1-Slot Filler Panel (3-Pack).

Part Number: 778178-01

This National Instruments cRIO-9421 8-Channel Digital Input Module for CompactRIO is new from surplus stock. It ships in the NI static bag. It has the 10-position screw terminal connector.

The National Instruments cRIO-9421 is an 8-channel, 100 µs sinking digital input module for any CompactRIO chassis. Each channel is compatible with 12 to 24 V signals and features transient overvoltage protection of 2,300 Vrms between the input channels and earth ground. Each channel also has an LED that indicates the state of that channel. The NI cRIO-9421 works with industrial logic levels and signals for direct connection to a wide array of industrial switches, transducers, and devices.

This National Instruments Process Control Demo Box is new from surplus stock. It ships in the NI static bag. P/N: 182302-01

This National Instruments GPIB to SBX Interface Module is new from surplus stock and comes in a NI Sealed Box.

This National Instruments TPI 9258 Oscilloscope Probe - 100X is new from surplus stock. This unit is used with NI high speed digitizer cards and has several interchangeable heads, a BNC connector on one end, a probe on the other, and a grounding clip.

P/N: 763395-01

This National Instruments PS-1 DC Power Supply is used and in excellent condition. This unit includes a cable.


• 120 VAC Input
• 20 VDC Output
• 16 W Output

Part Number: 777567-01

This National Instruments 5V Regulated, 1A, Desktop, Modified Output Jack Power Supply is new from surplus stock.

Part Number: 184532-01

This Condor 24VDC 1.5A Power Supply is new from surplus stock.

This unit is popular in powering the National Instruments Fieldpoint Modules.

National Instruments VXIpc-860 Ram upgrade 128MB (4) 32MB SIMMs. New in Box.

These are 72-Pin 60ns EDO SIMMs.

National Instruments VXIpc-860 Ram upgrade 32MB, (2) 16MB SIMMS. New in Box.

These are 72-Pin 60ns EDO SIMMs.

National Instruments VXIpc-850 Ram upgrade 16MB, (2) 8MB SIMMS. New in Box.

These are 72-Pin 70ns w/parity SIMMs.

This National Instruments VXI-MIO RAM Upgrade 8MB Onboard Memory is new from surplus stock. It ships in the NI static bag and original box.

P/N: 777351-08

This Agilent E8753A Rack Mount Kit for E1401A is new from surplus stock. This unit ships in the original packaging and box.

Part Number: E8753-80916

This unit is also known as the National Instruments VXI-1501 Rack Recess Kit, Part Numbers: 745744-01, 778177-01

This National Instruments Visa for Solaris 1.X is new from surplus stock.

Part Number: 777302-01

Included in kit:
• User Manual
• Programmer Reference Manual
• Software: Hyper Help P/N: 463355A-01
• Software: Support Files for LabWindows/CVI 3.1 Version 1.0 P/N: 500380A-00
• Software: NI-Visa for Solaris 1.X Version 1.0 P/N: 463354A-01

This National Instruments VXI Unix SW for SB-MXI is new from surplus stock. P/N: 776483-01

Included in kit:
• Software Reference Manual for C
• Text Utilities Reference Manual
• VXI-SB2020 and NI-VXI Software for Solaris Getting Started Manual

• NI-Visa for Solaris 2.X P/N: 777302-02, Kit Includes:
• User Manual
• Programmer Reference Manual
• Software: Hyper Help 2.X P/N: 463356A-01
• Software: Support Files for LabWindows/CVI 3.1 for 2.X Version 1.0 P/N: 500381A-00
• Software: NI-Visa for Solaris 2.X Version 1.0 P/N: 463353A-01

This National Instruments SCXI-1370 Rack Mount Kit is used and in excellent condition. This kit is compatible with the SCXI-1001 and PXI-1010 chassis. It holds the chassis in standard 19 in. rack-enclosures. The kit offers multi-position capability for both recessed and flush mounting.

Product Family: 776577-70, 182598A-01

National Instruments SCXI-1370 Rack Mount Installation Guide (pdf)

This National Instruments Front Rackmount Kit for PXI-10xx Chassis is used and in excellent condition. Compatible chassis include: PXIe-1065, PXI-1045, and PXI-1044.

Part Number: 189933A-01
NI Order Number: 778644-01

This National Instruments VXI-1501 Rack Mount Kit with Handles and Flanges is new from surplus stock. The Rack Mount Kit is also available from Agilent as the 5062-3987 Metric Rack Mount Kit with Handles. The kit is used for the following Agilent systems:

• E8752A
• 85128A-E34
• 85128A-E43
• 85128A-S43
• 8760A-KE9
• 8760B-KA3
• 8760D-K28
• 8760D-K29
• 8760D-K35
• E5501B-E19

The Agilent kit has been replaced by the newer part 5063-9225 Rack Mount Kit.

National Instruments VXI-1501 Basic Rack Mount Kit Installation Manual (pdf)

Part Number: 745822-01

This National Instruments SCC-A10 Voltage Attenuator Module is used and in excellent condition.

National Instruments SCC-A10 Datasheet (pdf)

National Instruments SCC-A10 Manual (pdf)

Part Number(s): 183725C-01, 777459-06

This National Instruments PXI-5411 Analog Output Board is used and in excellent condition. It is a replacement board for the PXI-5411.

P/N: 185393A-01, 185395A-01.

This National Instruments NI-5421 PCB Board is used and in excellent condition. It is a replacement board for the NI-5421.

P/N: 190952A-02

This National Instruments Scarab SDRAM Module is used and in excellent condition.

P/N: 185422D-01

This National Instruments cFP-xxxx Power Supply Card is used and in excellent condition. This is the power supply card for the cFP-xxxx series Controllers.

Configuration:
• COM Port Installed on J4
• Compact Flash Slot

Part Numbers: 188543B-02, 188545B-01

This National Instruments cFP-xxxx Power Supply Card is used and in excellent condition. This is the power supply card for the cFP-xxxx series Controllers.

Configuration:
• Compact Flash Slot

Part Numbers: 188543B-01, 188545B-01

This National Instruments 184845F-03 Bridge Module Backplane is used and in excellent condition.

Part Number: 184845F-03, 184847D-01

This National Instruments CB-68LPR 68-Pin Digital and Trigger I/O Terminal Block is used and in excellent condition. It is a low-cost termination accessory with 68 screw terminals for easy connection of field I/O signals to 68-pin DAQ products. The connector blocks include standoff feet for use on a desktop or mounted in a custom panel. The CB-68LPR has a right-angle mounted 68-pin connector.

Dimensions: 7.62 by 16.19 cm (3.00 by 6.36 in.)

Part Number(s): 184700B-01, 184700C-01

National Instruments CB-68LP 68-Pin Digital and Trigger I/O Terminal Block Datasheet (pdf)

This National Instruments TBX-1316 SCXI High-Voltage Attenuator Box is used and in excellent condition. This unit does not contain the internal circuit board.

View Photo of the inside of this unit

National Instruments TBX-1316 Datasheet (pdf)
National Instruments TBX-1316 Manual (pdf)
National Instruments TBX-1316 Specifications (pdf)

This National Instruments BNC-2140 DSA Signal Conditioning Accessory is used and in excellent condition. This unit ships with a 1 meter SHC68-C68-A1 analog cable. This unit is compatible with National Instruments PCI-4451, PCI-4452, NI 4551 and NI 4552.

National Instruments BNC-2140 Manual (pdf)

This National Instruments VXI-TB-96 96-Channel Terminal Block board is used, and in excellent condition. This board can be used to upgrade a VXI-TB-196 to a VXI-TB-296.

This National Instruments Firewire 1394 Motherboard is used and in excellent condition.

Part Number: 184946E-02

This National Instruments CB-68LP 68-Pin Digital and Trigger I/O Terminal Block is used and in excellent condition. It is a low-cost termination accessory with 68 screw terminals for easy connection of field I/O signals to 68-pin DAQ products. The connector blocks include standoff feet for use on a desktop or mounted in a custom panel. The CB-68LP has a vertical-mounted 68-pin connector.

Dimensions: 14.35 by 10.74 cm (5.65 by 4.23 in.)

P/N: 183030A-01

National Instruments CB-68LP 68-Pin Digital and Trigger I/O Terminal Block Datasheet (pdf)