IOtech DAC488/4 4-Channel 12-Bit D/A Converter w/ Digital I/O and IEEE488
|
Features
- (4) 12-bit Isolated D/A Converters
- Programmable Ranges or Auto Ranging (±1, ±5, or ±10)
- Built-in 8192-Point Waveform Buffer
- Sequenced Output Based on Either a Periodic Interval or Triggered Condition
- 8-bit Digital Input Port & 8-bit Digital Output Port
- Analog Output Channels are Isolated
|
Available Stock Items and Accessory Choices
Description
DAC488/4™ is an IEEE 488 to 12-bit plus-sign analog output converter. The unit has four analog output channels that are isolated from IEEE 488 common and from other analog channels by up to 500V. Each channel can be programmed for full-scale output of ±1V, ±5V, or ± 10V. You can program each channel for output in increments of 1 part in 4096 plus sign. Outputs can be specified in either volts or bits from the IEEE 488 bus. A quickdisconnect terminal block provides convenient signal connection.
An 8 Ksample waveform buffer allows you to store waveforms for each channel with a maximum update rate of 1 kHz per sample. Each waveform can be output in sequence, based on either a periodic interval or one of three trigger conditions: an external trigger, a trigger command,
or the group execute command (GET) IEEE 488 bus command. Each port can be triggered independently via any of the trigger conditions.
Eight bits of digital input and eight bits of digital output are also provided. These are TTL-level non-isolated lines that can be programmed from the IEEE 488 bus.
Pictures
Click on pictures below for larger image:
Resources - Manuals, Datasheets, Drivers, Links
Click on links below for more information: