Agilent 6542A 200 Watt Power Supply
|
Features
- 20V 10A Low-Noise Output
- Linear Output Regulation
- Front Panel or Analog Programming
- Overvoltage and Overcurrent protection
- Over-Temperature Protection
- Self-Test Initiated at Power-Up
- User-Defined Power-On State
|
Available Stock Items and Accessory Choices
Description
The Agilent 6542A models are 200 Watt, single output, series pass regulated power supplies, with front panel and analog programming of output voltage and current. This reliable series of 200 W dc power supplies can be controlled either from the front panel or via an analog programming voltage. When used in a test system, the fast up and down programming helps decrease test time. Quickly reacting protection features, including fast crowbar, CV/CC mode crossover and over-voltage protection help protect your valuable assemblies from damage. The linear topology produces very low ripple and noise, which allows you to make extremely accurate measurements of the devices which you are testing. Lab bench use is enhanced by the fan speed control, which helps to minimize the acoustic noise.
Technical Specifications
| Output Voltage | 0 to 20 V
|
| Output Current | 0 to 10 A
|
| Voltage Programming Accuracy | 10 mV
|
| Current Programming Accuracy | 13 mA
|
| Voltage Ripple & Noise (rms) | 300 µV
|
| Current Noise (rms) | 5 mA
|
| Voltage Load Regulation | 2 mV
|
| Current Load Regulation | 0.5 mA
|
| Voltage Line Regulation | 0.5 mV
|
| Current Line Regulation | 0.5 mA
|
| DC Output Floating Voltage | +/- 240VDC from Chassie Ground
|
| Power Requirements | 120VAC / 4.5A
|
| Dimensions | 16.8 x 3.5 x 17.3 in. |
Pictures
Click on pictures below for larger image:
Resources - Manuals, Datasheets, Drivers, Links
Click on links below for more information: